Apopka, Florida // Engineering & Manufacturing // Est. 2004

(407) 673-1512
Discuss Your Requirements
Request a Quote
Your design, our floor

Your Design. Our Floor. A Boundary Both Sides Can Name.

Contract manufacturing is a chain of custody over someone else’s design. Four stages, and the ownership of each one shifts — which is precisely the thing worth agreeing before the first part is cut.
Start a requirements conversation
See the boundary

Who owns what

2 JE / 2 yours

S1

Engineering

Customer

S2

Manufacturing

JE

S3

Assembly

JE

S4

Delivery

Customer

The boundary is not fixed — JE decides at 2 of 4 stages, you decide at the other 2.

  • Engineering
  • Manufacturing
  • Assembly
  • Delivery
01 Where the boundary sits

The Boundary Moves at Every Stage

On a contract programme the customer arrives with a design and JE arrives with a floor. Which of the two decides is not constant — it shifts stage by stage, and the failures happen where both sides assumed the other one owned it.
Stage // decision owner // what crosses the boundary 4 STAGES
Stage Who decides What crosses the boundary
S1 Engineering
Reviewing the supplied design for manufacturability before anything is committed.
Customer The design itself stays yours
Drawings and specifications in; manufacturability questions back out.
S2 Manufacturing
Cutting, forming, machining and welding to the approved drawings.
JE Process, sequence and tooling
Approved drawings in; finished components and process records out.
S3 Assembly
Joining components into the finished unit and verifying fit and function.
JE Build order and fixturing
Components in; a verified assembly and inspection results out.
S4 Delivery
Packaging, transport and handover to the project location.
Customer Destination, timing and acceptance
The assembly out; acceptance and documentation back in.
Customer decides — JE executes and reports JE decides — within the approved scope
Read the middle column. JE owns 2 of 4 decisions and both are about process, not design — which is the distinction a contract programme lives or dies on.
The one JE will not do silently

A fabricator who improves your design without telling you has failed the brief.

Where a drawing carries something JE would build differently, the question comes back to you rather than the change going quietly onto the floor. That is what makes the ledger above worth agreeing in advance.
02 Where you can join

Six Ways In, One Boundary Each

Engagements span custom end-to-end delivery, engineering through delivery, manufacturing and assembly, engineering only, machining only, or assembly only. Each one moves the boundary in the ledger above to a different place.
E1

Custom end-to-end delivery

Boundary sits at: nothing — JE holds all four

E2

Engineering through delivery

Boundary sits at: the concept; JE takes it from there

E3

Manufacturing and assembly

Boundary sits at: the finished design

E4

Engineering only

Boundary sits at: manufacture and beyond

E5

Machining only

Boundary sits at: everything but the machined parts

E5

Assembly only

Boundary sits at: fabrication; JE joins and verifies

03 Six-stage project lifecycle

Manufacturing Is One Stage of Six

Each stage produces something specific, and the approved scope decides which of them JE runs on your programme.
01

Requirements & Site Assessment

Understanding the application, environment, and operational need before anything is drawn.
Produces: An agreed scope
02

Design & Engineering

Reviewing or developing a manufacturable solution around that scope.
Produces: Drawings and analysis
03

Contract

Precision Manufacturing

The contract work above — cut, formed, machined and welded to the approved drawings.
Produces: Finished components
04

Assembly & Quality Verification

Joining, fitting and confirming the unit against specification.
Produces: A verified assembly
05

Delivery & Deployment

Packaging, transport and installation at the project location.
Produces: Equipment in service
06

Documentation & Support

Manuals, records and continued assistance after handover.
Produces: Records and support
04 Technical proof

Contract Work in Service

Three programmes at different points on the boundary — build-to-print, fabricate-and-finish, and a fixture built to carry a flight-critical part.
Case 01
Build to print

Picker Pallet Frame

Two identical frames from customer drawings. The customer owned the geometry; JE owned only the process.

Open
Case 02
Fabricate and finish

Turbine Facility Access Platform

A facility-specific access system fabricated and installed around equipment JE did not design.
Open
Case 03
Fixture

V-22 Osprey Nacelle Fixture

A fixture built to carry a flight-critical part and return it unmarked.
Open
07 Technical & operational FAQ

Questions About Contract Manufacturing

Q01

Will JE change our design if it sees a better way?

No — not silently. Where a drawing carries something JE would build differently, the question is raised with you and the decision stays yours.

Q02

Can JE take on part of a programme rather than all of it?

Yes. Engagements span custom end-to-end delivery, engineering through delivery, manufacturing and assembly, engineering only, machining only, or assembly only.

Q03

What documentation comes with a contract build?

Process and inspection records accompany the parts, with drawings, manuals and quality records as applicable to the approved scope.

Start a Requirements Conversation

Tell us which stages you want to keep and which you want to hand over. That is the whole scoping conversation.

Apopka, Florida   Your drawing, our floor, one accountable party

Request a Quote
Schedule a Call
Call (407) 673-1512